OUR PRODUCTION
PROCESS

Print any design, for anyone, on any product with DTF Transfers

Our High Quality DTF (Direct to Film) transfers allow anyone from small to large shops, hobbyists, and brands to print any design on any product. There is virtually no limitation to what we can print whether you need bright white, solids, gradients, or fine lines!

  • Cotton & Tri-Blends

  • Polyester & Nylon

  • Sweatshirt

  • Hats, Caps & Beanies

  • Tote Bags

  • And Much More...

Our Promise to you

100% Satisfaction Guarantee

Trying something new can feel like a risky decision. We want you to feel confident every step of the way and be our customer for years to come. That’s why we guarantee you’ll love your transfers.

If for any reason you’re not completely satisfied, we’ll remake them at no extra cost, no questions asked.We’re that confident in our quality and service - and we can’t wait toshow you why!

Heat Pressing Instructions

1

Align Your Transfer

Do an Initial press of the garment. Position your Transfer on your product using a guide tool.

2

First Pressing

For 100% Cotton & Triblend Garments: Set pressing temperature to 258-300 F. Press for 8 seconds at 60 psi(Med-High pressure). For Polyester Blend Garments: Set pressing temperature to 260-265 F. Press for 8 seconds at 30 psi (Low Pressure).

3

Peel Off Transfer

This is a HOT PEEL - just peel it off! *If prints are not releasing from film properly, pressure on 1st press is too low. Use riser or heat press pillow to have good contact between decorating area of garment and heating plate. Adjust pressure to higher setting or rub the film onto the garment before peeling off after 1st press.

4

Second Pressing Improves Hand Feel

*Use a Teflon protective sheet or parchment paper between the garment and heating platen of heat press of iron. Press once more with the same settings for better wash-ability and hand-feel.